Resources
Resources.
Reference material on bulk material handling and port machinery — written for the people who have to specify, buy and maintain it.
Guides in preparation
The article library is being written
We are preparing practical guides on the questions we get asked most often. They are listed below so you can see what is coming and tell us what to prioritise.
In preparation
Specifying a ship loader for a coal import terminal
Rail-mounted, mobile, fixed or slewing — how the choice follows from berth layout and required throughput.
- Ship Loader
- Terminal Design
In preparation
Ship unloader types compared
Pneumatic, grab-type and balance cranes — where each one is the right answer and where it is not.
- Ship Unloader
- Port Machinery
In preparation
Choosing conveyor belt grade by material
Abrasion, heat and oil resistance — matching belt specification to what is actually on the belt.
- Conveyor Belts
- Belt Conveyor Components
In preparation
Idler roller selection and spacing
Diameter, spacing, sealing and bearing life — the variables that decide how long an idler lasts.
- Idler Rollers
- Maintenance
In preparation
Grab bucket wear: reline or replace?
How to judge remaining life on a clamshell or orange-peel grab, and when a ceramic or polymer liner pays for itself.
- Grab Bucket
- Wear Liners
In preparation
Preventive maintenance for a bulk handling line
A practical daily, weekly and shutdown checklist for conveyors, drives and transfer points.
- Maintenance
- Training
Nothing is published yet. These guides are listed as a plan, not as finished articles. If one of them would help you now, ask us directly — we will answer the specific question sooner than the article appears.
Reference
Equipment terms used on this site
Short definitions for the machinery names and component terms you will find across our design, spare parts and training pages.
Bulk material handling and port machinery — working glossary
| Term | What it means |
|---|---|
| Ship loader | Equipment that loads bulk material into a vessel’s holds. Configured as rail-mounted, mobile, fixed or slewing depending on berth layout. |
| Ship unloader | Equipment that discharges bulk material from a vessel. Supplied as pneumatic, grab-type or balance-crane configurations. |
| Stacker | A machine that builds stockpiles in a stockyard by discharging material along a defined path. |
| Reclaimer | A machine that recovers material from a stockpile and feeds it back into the conveying circuit. |
| Blending machine | Equipment that combines material streams or pile sections to even out quality variation before dispatch. |
| RTG crane | Rubber-tyred gantry crane — a container yard crane that travels on tyres and can be relocated between blocks. |
| RMG crane | Rail-mounted gantry crane — a container yard crane that runs on fixed rails, typically for higher-density automated yards. |
| Telescopic spreader | The adjustable lifting attachment that locks onto containers of different lengths, single-lift or twin-lift. |
| Idler roller | A rotating roller that supports the conveyor belt and the material load along the carrying and return runs. |
| Pulley | A drum that drives the belt or changes its direction of travel. |
| Belt cleaner | A device that removes carry-back material from the return side of the belt to stop spillage and build-up. |
| Skirt rubber | Rubber sealing strip fitted along the conveyor loading zone to contain material and control dust. |
| Impact bed | A support arrangement at a transfer point that absorbs the impact energy of falling material instead of the belt. |
| Grab bucket | A clamshell or orange-peel bucket used with a crane or ship unloader to handle loose bulk material. |
| Wear liner | A replaceable ceramic or polymer layer fitted to high-wear surfaces such as chutes, hoppers and grab shells. |
Document library
What paperwork to expect with a machine
Buyers in developing markets are often quoted a price with no defined documentation. This is the document set we issue with equipment, so you can check what a supplier means when they say “with drawings”.
Documents issued with equipment — and what each one is for
| Document | What it is for |
|---|---|
| General-arrangement drawing | Overall dimensions, clearances and foundation loads — the basis for civil works and site layout. |
| Structural calculations | Load cases and stress checks on the main structure, referenced to the design code. |
| Mechanism and drive sizing | Motor, brake, gearbox and rack selection with the duty class they were sized for. |
| Fabrication and weld details | What the workshop builds from — plate sizes, weld symbols and tolerances. |
| Component schedule | Item-by-item parts list with quantities and material, for procurement and spares. |
| Operation and maintenance manual | Daily checks, lubrication schedule, wear limits and fault-finding charts. |
| Acceptance and test record | The check and load-test sheet completed before the machine is released for use. |
Ask for a sample. The design-services page shows a real general-arrangement drawing and a mechanism calculation book from our set. If you want to see the documentation level before you commit, ask and we will send a redacted sample for your equipment class.
Have a technical question?
Pre-sales technical consultation is free. Send the question and we will answer it within 24 hours.